View Single Post
Old March 19th, 2009, 12:28 AM
chrisicool's Avatar
Status: Offline
Hookah Pro
Join Date: Jan 2009
Posts: 703
Default Re: Glass Tip Pictures!!!

Okay, I figure I'll give you guys a bit of information on the compatibility and what I've discovered on a few different hoses. Most of the upper end hoses are all standardized. Meaning, all the circumferences and diameters of the hoses are the same. So far from what I've discovered the tips will fit into all the following: KM hoses(removal of tip by force), Caravan hoses(removal of tip by force), Razan hoses, Nammor hoses. They fit quite snug into them all. and there is no need to tape or glue, or hold the tip into place at all. It's a tight fit. The one tip came out smoothly because I pulled it out with force and it was a homemade hose(a tad larger than a typical hose) haha. In terms of color and design, I'm working with my outsource to get some variations of things done. Your input is appreciated, it gives me an idea of what people want.

Last edited by chrisicool; March 19th, 2009 at 12:33 AM.
Reply With Quote