View Single Post
Old July 16th, 2009, 02:31 AM
Status: Offline
Hookah Pro
Join Date: Jun 2009
Location: OC
Posts: 541
Default Re: MYA Auto-Seal Hose Adapters

The auto seal adapters have the ball bearings inside the adapter themselves and are held in place by a screw.

If you look at the picture in that link, the regular adapter is on the left and the autoseal is on the right.

If you are using only 1 hose, you should use the regular adapter. The autoseal has noticeably less draw and requires some suction to unseat the ball bearing before smoke will flow, which can become troublesome if the ball gets stuck. The purpose of the autoseal is so you do not have to plug the tip of the idle hose.
Reply With Quote