View Single Post
Old January 1st, 2010, 07:26 AM
glostersa's Avatar
Status: Offline
Hookah Master
Join Date: Mar 2009
Location: South Africa Kempton Park
Posts: 5,499
Default Re: Need help fixing my hookha

First remove the rust by sanding with a fine emery paper then get a blowtorch and heat the weld apply some soldering flux and once the flux runs freely add some solid plumbers solder to the joint it should flow into the joint. If the gap is wide take some thin stranded copper wire and wrap round the joint and in the joint to act as filler then flux and solder this should effectively reseal the joint and stop any further water intrusion.
***Live your life in such a way that when your feet hit the floor in the morning Satan shudders and says Oh shit he is awake***
Reply With Quote