Originally Posted by makenooise
Hey, I have a lot of cracks on the stem of my hookah and it's been affecting the smoking experience. I was told to use aquarium glue to fix it, but I just wanted to make sure if that was correct and/or if there is something else I should be using. Thanks.....
If you have cracks on the down stem then you lose alot of the vacuum pressure. I would try to solder it first using plumbing type solder (not electrical) since it does not contain lead. If thats not an option for you then use someting called J.B Weld. Its an epoxy that comes in 2 seperate tubes and when combined becomes very hard. You will find it in Home depot or similar stores.