Help with buying a hose adapter to make my 1 hose hookah a 2 hose!

http://cgi.ebay.com/ws/eBayISAPI.dll...2#ht_644wt_911

that is the exact hookah I have, does anyone know if this adapter will work!? http://www.socialsmoke.com/item--Hos...ADAPTER01.html

or where the cheapest adapter I can get is?

Basically I can take off the hookah release valve and it has the threaded part coming out of the hookah stem/base so I need an adapter to screw onto it!

thank for any help you can offer!

Gosustrat

[Dusty62]

If I read your description of the purge valve assembly on your hookah correctly when you remove the valve you have a short piece of pipe sticking out with threads on the outside of it where the purge valve cap screws on over it. Basically an attached male part with a removeable female part. If that is the case then the adaptors you showed above won't work because they all have male screw in ends, as evidenced by the threads showing in the picture. What you would need is a hose adaptor with a female threaded end on it to screw on over the male portion that is part of your pipe stem. If someone made a female/female threaded collar you could use that to adapt a male hose adaptor to a male receptacle on a pipe stem but I know of none of these in production. I also am not aware of any female threaded hose adaptors, either, though someone else might be more well informed than I am. Of course, all of this is moot if I didn't understand your description well. Pictures would be a real big help in letting us help you. Attach a pic of your disassembled purge valve and then there wouldn't be any questions as to the description of your rig. Smoke happy.

dus'

[ariberns]

is the purge valve removable?
most hookahs cant be upgraded.
some syrians and mya's have that feature

[Geolas]

If you can remove the Purge Valve Stem, you can use that.

Yes i can take off the purge valve here is a link to my hookah after the valve is released

[IMG]<a href="http://tinypic.com" target="_blank"><img src="http://i50.tinypic.com/j0zi2b.jpg" border="0" alt="Image and video hosting by TinyPic"></a>[/IMG]

[alanpeterson68]

here is a link to h-s site with all of their adapters.

http://www.hookah-shisha.com/c-487-h...ah-valves.html

[Ahildebrand13]

I think the mod ones from H-S will work, at least they look like female ends to me.